Joined in 2023 
82 
63 About this deal
Payload Capacity- Top - 123g (example: Garmin 830) / Bottom 242g (example: NiteRider 1800 or Cycliq FLY12 light/camera) I don't own a GoPro, but do have a couple of front lights with the same finned mounting. The removable undermount uses the same quarter-turn fit and release action as the GPS, so once your accessory is fixed to the mount, it can be fitted to the bike in seconds, which is very convenient. For my front light, being able to fit it once, adjust the beam angle, and tighten, knowing that the same angle will be retained for every future use, is a definite bonus, and it makes recharging simple too. The Forevercam Handlebar Mount is an extremely durable full metal GoPro handlebar mount. This mount is made with aluminum alloy, which provides a lightweight yet durable build. In addition, it features an off-center camera mount with a 360-degree rotatable head. This mount can be attached to any round or semi-round tube with a diameter of 0.8 to 1.37 inches. Therefore, you can also use it for your seatpost and other tubes on your bike’s body. Best of all, this mount provides smooth GoPro footage even when biking through rough terrain.
The GoPro Helmet Mount is the best helmet mount for biking because it’s easy to use and provides an excellent point of view. Since you place it on your helmet, the viewing angle is just a little higher than eye level. Therefore, it offers a beautiful vantage point where you can see the entire scenery and terrain ahead of you. What’s the benefit? That depends on the shot you want…if we’re being honest, chest and helmet cams provide a bit better perspective for both riding and following someone. But with the latest action cameras offering incredibly good stabilization and wide angles, getting good follow-cam footage from the handlebar is entirely possible. Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Furthermore, the adjustable ball head lets you rotate your GoPro in any direction. For example, if you come across beautiful scenery on your left-hand side during your bike ride, you can simply rotate your camera to capture the footage. In addition, it comes with a small wrench to tighten the mechanism once you’ve rotated it to your desired angle. Everything works well together, but it can be difficult to remove due to the tight screws.In terms of setup, it takes a few seconds to clamp the mount to your handlebars. It fits any round tube from 0.87 to 1.38 inches. However, you can also attach the mount to reflective mirrors with a diameter ranging from 0.27 to 0.63 inches. Considering the additional functionality offered by the CM06 kit, and the potential handlebar space savings to be made by mounting your GoPro or front light beneath your GPS unit, the KOM Cycling mount is a worthy contender for your bike, and reasonably priced. Verdict
On the downside, the PGYTECH is nearly double the price of the Forevercam Handlebar Mount. For this reason, it might not be the best choice for budget-conscious bikers.
LifeLine ANT+ USB
With the additional weight of the light plus the Garmin, I was concerned about excessive flex, but again, the KOM does a decent job of keeping everything stable. Both my GPS and front light are relatively light, and I don't own a Garmin 1030 or heavier, compatible light to really push the KOM's limits, but with its overbuilt construction and grippy shims, I expect it's up to the task. KOM Cycling guarantees the CM06 for life, with the usual caveats, so it seems to have faith in it too. Value The new Go Big On-Center Mount the next generation in our industry-leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center gives you a better-framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 830, Edge 820, Edge 530, Edge 520, Edge 20, and Edge 25 models (Edge 1030 and Edge 1000 fits on the longer XL mount) My main criticism of this camera is that the 360-degree swivel doesn’t let you set any position. This is because it has specific stops about 20 to 25 degrees apart. So although you can technically swivel it 360 degrees, it doesn’t offer truly precise viewing angles.
This mount is one-size-fits-all and adjustable for most body sizes. Furthermore, this mount captures a near-perfect first-person perspective of your bike rides. Although it’s placed a bit lower than eye level, the chest mount offers an immersive view of your exhilarating rides. Today’s cycling electronics give you all the features you could want, battery life and max lumens, but it comes with added weight. The K-EDGE Max mount was designed for this reason. While some bikers find this mount inconvenient, I personally love using this mount for bike rides. It offers a lot of viewing angle creativity, allowing me to make unique and captivating GoPro bike videos. Furthermore, this mount makes it easy to film other bikers since you can simply turn and point the camera in any direction. The Garmin and Wahoo disc inserts are easy to swap, if necessary, and my Garmin Edge 830 fitted positively with the usual quarter turn. Some mounts have a screw system, some are clamps, and some are a combination of the two. You have to decide which mounting mechanism will work the best for your bicycle, as they all work well in different situations. Build QualityNow, it’s time to jump into my list of the top recommendations. I narrowed down a list of over 50 options to give you the best of the best. Therefore, these are the only GoPro mounts you should consider for biking if you don’t already own any GoPro bike mounts. There’s actually two different GoPro mounts offered by KOM. The bundle tested and shown here is the CM06 computer mount, which is different than their other mounts in that it has the quarter-turn tabs built into the bottom of it. Always consider the size of your handlebars when searching for mounts that clamp on them. If the handlebars are large, it is possible that the mount will not be big enough to clamp down in a way that keeps the camera steady. Mounting Mechanism This one also works with any compatible headlight, making it an easy way to add (and remove) a light if you’re not running a cycling computer. K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY and break away in a crash to protect the computer body.
Great Deal 
New Comment